COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
UNKNOWN
184: A read error has occurred.
181: An error occurred in writing a file to the network.
110: (%s)
The path specification is invalid.
111: You do not have rights to print files from this directory.
112: No files were found that match %s.
201: A number between 1 and 18 is expected with the Tabs option.
211: A number between 1 and %u is expected with the
Copies option.
220: A form ID number or form name is expected with the Form option.
Please wait.
240: The banner must have between 1 and 12 characters.
242: The NetWare server name must have between 2 and 47 characters.
921: Either the supervisor has locked the bindery or volume SYS: is not mounted on server %s.
182: An error occurred in reading information from the destination server.
298: An unknown option %s is in the list of options.
117: The given base drive is not defined.
121: The destination NetWare server %s is unknown at this time.
903: The command line syntax is invalid.
104: The path/file specification is missing from the file list.
183: An error occurred in reading information from the source server.
113: The file %s could not be found.
502: This utility expects that when the Server option is supplied on the command line that
the Queue option refers to a print queue on the specified NetWare server.
The print queue name you have supplied is longer than the maximum
47 characters allowed for a non-Directory based print queue.
170: The destination server must use Advanced NetWare V2.10 or above.
114: An error occurred in getting the server name.
109: You are not attached to the source server %s.
600: This utility is accessing an incorrect version of the
PRINTCON database.
Do you want to detach from NetWare server %s? (Y/N)
Enter user name for NetWare server %s:
Enter your password:
141: Access to server %s has been denied.
GUEST
The following files are being sent to server %s, print queue %s:
%-12s (Job ID=%08lX)
107: This utility was unable to delete the file after sending it to the print queue.
607: The default print job configuration cannot be found.
Therefore a Printer or Queue must be specified on the command line.
Local Drive %c:
122: This utility could not attach to the NetWare server %s.
136: This user account on NetWare server %s has expired or
has been disabled by the supervisor.
Would you like to change your password on server %s? (Y/N)
Retype your new password:
133: Your password has expired and there are no grace logins available.
132: Your password has expired.
922: Intruder detection lockout has disabled this account.
139: The account balance for this user on server %s
has dropped below the minimum.
Enter your new password:
140: This user account on server %s has no accounting balance.
Contact the supervisor to increase the balance.
135: NetWare server %s does not allow you to attach during an unauthorized time period.
The supervisor has limited the times that this account can be accessed.
134: Your station is not approved to attach to server %s using this
user account.
The supervisor has limited the stations that are allowed.
400: Your password on server %s has been changed.
403: Your password on server %s has not been changed.
402: The new password has been used previously.
401: The new password is too short.
137: Too many stations are already attached to NetWare server %s using this user account.
The supervisor has limited the number of active concurrent connections.
405: The new password was not retyped correctly.
130: The supervisor has disabled the login function on NetWare server %s.
243: The print queue must have between 2 and 47 characters.
160: Print queue %s cannot be found.
404: An invalid character was found in the specified password.
161: The ID number of the specified print queue could not be obtained.
115: The connection information on the destination server could not be obtained.
Job configuration :%s
Would you still like to change your password on server %s? (Y/N)
222: The form name, %s, could not be found.
223: This utility cannot get the information about the
specified form.
221: The form number must be a number between 0 and 255.
155: The NetWare queue management system returned a "no such object" error.
300: The destination server is busy.
Abort, Retry, or Ignore?
301: A disk I/O read error occurred.
Abort, Retry, or Ignore?
302: Program aborted.
920: This utility was unable to allocate %d bytes of memory.
150: The print queue is full. Either the print job capacity of the print queue
has been reached or the server volume is out of disk space.
Try again.
151: This user account is not authorized as a print queue user for the specified print queue.
152: A print queue error occurred.
153: The supervisor or print queue operator is not allowing print jobs to enter the print queue.
156: An unknown print queue error 0x%04x occurred.
157: A default print queue cannot be found. Do one of the following:
Specify a printer or print queue with this utility.
Specify a default printer or print queue with PRINTCON.
Have the network supervisor specify a default print queue with SPOOL.
241: The name must have between 1 and 12 characters.
105: An error occurred opening the file.
162: This user account is not authorized as a print queue user for print queue %s.
124: You are attached to NetWare server %s, but you are not logged in.
171: This utility requires Advanced NetWare v2.10 or above.
180: There is insufficient disk space to store the print job in the print queue.
Have the supervisor increase the available disk space
on the volume where the print queue is located.
601: An error occurred in getting the default print job configuration.
154: The specified print server cannot service the specified print queue.
You are attached to server %s.
Banner Help Screen\hPurpose: Determine if a banner page will print at
the beginning of your print job. You can replace
the default file name and user name.\hOptions:
No Banner (abbreviated NB)
Specifies that no banner page be printed.
NAMe=<name> (abbreviated NAM=) Default is your user name.
Specify text that will appear on the upper
part of the banner page.
Banner=<banner name> (abbreviated B=) Default is your filename.
Specify text that will appear on the lower
part of the banner page.
Replace <banner name> or <name> with up to 12
characters of text. Place quotes ("") around the
text if it contains spaces.
Copies Help Screen\hPurpose: Specify the number of copies to print.\hOptions:
Copies=<number> (abbreviated C=)
Use to indicate how many copies you want to
print. Replace <number> with the number of
copies. Default number of copies is 1. This
will be the number of copies printed.
106: You have no rights to delete this file.
120: Your workstation cannot attach to NetWare server %s.
You currently have the maximum number of NetWare server attachments allowed (8).
123: There is no available slot for attachment on NetWare server %s.
200: The tab size must be a number between 1 and 18.
210: The number of copies must be a number between 1 and %u.
608: This utility is unable to find the printer, %s,
in the directory. This printer was specified in a print job configuration.
609: No print queues are serviced by printer %s.
This printer was specified in a print job configuration.
Printer %s doesn't have a default print queue.
A substitute print queue serviced by the same printer will be selected.
501: No print queues are serviced by the specified printer, %s.
Delete Help Screen\hPurpose: Deletes the file after sending it to the print queue.\hOptions:
Delete (abbreviated D)
Include this option to automatically erase the file after you print
it. The default is to not delete the file or files.
500: This utility is unable to find the specified printer, %s, in the directory.
700: The mode, %s, of device, %s, cannot be found in the PRINTDEF database.
The following files are being sent to printer %s
using print queue %s:
Job owner :%s
VeRsIoN=4.01
NPrint will use the following option settings:
CoPyRiGhT=(c) Copyright 1983 - 1993, Novell Inc. All rights reserved.
(PUBLIC)
602: An error occurred in opening the PRINTCON database,
PRINTJOB.DAT owned by %s.
603: An error occurred in reading the PRINTCON database,
PRINTJOB.DAT owned by %s.
224: The form number supplied was not in the forms
database. Default values for an UNKNOWN form were used.
230: This utility can only print to a print queue when using
bindery-based NetWare. Specify a print queue. For
example, q=LEGAL_Q. The printer specification
cannot be used unless you are authenticated.
231: You may not specify both a printer and a print queue
on the command line.
232: A printer name is expected to specify which printer
will receive the print job.
917: This utility was unable to set the context.
116: An error occurred in getting your username from the shell.
Notify :Enabled
Notify :Disabled
Banner :%s
Banner :(None)
Form Feed :Enabled
Form Feed :Disabled
Delete File :Enabled
Delete File :Disabled
Tabs :%-2d
Tabs :Disabled
Copies :%u
Form :%-3d
The following files are being sent to print queue %s:
The following files are being sent to printer %s:
Name :%s
Name :(None)
Banner :<Filename>
%s (Job ID=%08lX)
906: The Unicode files cannot be found.
Job configuration :(No job configuration found. Internal defaults were used.)
>>>Enter = More C = Continuous Esc = Cancel
923: An unexpected error has occurred: %d (%04.4X).
604: The PRINTCON database handler had an internal error.
605: The print job configuration default has not been set.
606: A print job configuration name must be specified with the j= option.
General Help Screen\hPurpose: Send files to a network printer.\hSyntax: NPRINT path[,path...] [options]
Options are any of:
/Banner=banner name /NAMe=name /No Banner
/[No] FormFeed
/[No] NOTIfy
/Tabs=n (1-18) /No Tabs
/Copies=n (1-65000)
/Delete
/Form=form or n
/Job=job configuration
/Queue=print queue name
/Server=NetWare server
/Verbose\hOther help: /? option or /? ALL
General Help Screen\hPurpose: Send files to a network printer.\hSyntax: NPRINT path[,path...] [options]
Options are any of:
/Banner=banner name /NAMe=name /No Banner
/[No] FormFeed
/[No] NOTIfy
/Tabs=n (1-18) /No Tabs
/Copies=n (1-65000)
/Delete
/Form=form or n
/Job=job configuration
/Queue=print queue name /Printer=printer name
/Server=NetWare non-Directory server
/Verbose\hOther help: /? option or /? ALL
158: The desired queue was incorrectly created.
TheDirectory indicates that it is one place when it is
somewhere else or does not exist at all.
Form Help Screen\hPurpose: Specify a form to print on.\hOptions:
Form=<form> (abbreviated F=) (Default is form=0)
Specify the name or number of the form to
print your job on.
Form Feed Help Screen\hPurpose: Leave the printer ready to start the next
print job at the top of the next sheet of paper
after this print job is printed.\hOptions:
FormFeed (abbreviated FF)
If form feed is enabled, the printer starts
printing the next job at the top of the next
sheet of paper. However, if an application
places a form feed at the end of its output,
using this option causes an extra blank page to
be fed through. Default is FormFeed enabled.
No FormFeed (abbreviated NFF)
Include to disable form feed at the printer.
Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration> (abbreviated J=)
Specify which job configuration to use.\hNprint options can be configured using PRINTCON.
The order of precedence is 1) specific use of the
command line option, 2) specific use of the Job
option, 3) default job, and 4) internal defaults
indicated below:
No NOTIfy -- Server=your default server -- Form=0
Copies=1 -- NoTabs -- NAMe=your username
Banner=the name of the file you are printing -- FormFeed
Job Help Screen\hPurpose: Specify the print job configuration to
use to print this print job.\hOptions:
Job=<job configuration> (abbreviated J=)
Specify which job configuration to use.\hNprint options can be configured in a print job configuration.
The order of precedence is 1) specific use of the
command line option, 2) specific use of the Job
option, 3) default job, and 4) internal defaults
indicated below:
No NOTIfy -- Form=0
Copies=1 -- NoTabs -- NAMe=your username
Banner=the name of the file you are printing -- FormFeed
Notify Help Screen\hPurpose: Receive messages from the print server to
appear at your workstation.\hOptions:
NOTIfy (abbreviated NOTI)
Include if you want to be notified that your
data has printed. A message will appear across
the bottom of your screen:
>> bannername PRINTED ON printername.
Banner name is either the name of the file you are printing or the
text you specified with the Banner option.
No NOTIfy (abbreviated NNOTI)
Include if you do not want to be notified. You
need this only if NOTIfy is enabled in your
PRINTCON job configuration and you want to
disable it.
Default is No NOTIfy.
Queue Help Screen\hPurpose: Direct a print job to a specific print queue.\hOptions:
Queue=<print queue name> (abbreviated Q=)
Indicate to which print queue the print job
should be sent. There is no default print queue
set up unless SPOOL 0 TO <printqueuename> was
typed at the NetWare server console or you
specified a print queue in a print job
configuration. The <print queue name> should be
replaced with the name of the print queue, any
number of characters between 2 and 47.
Printer/Queue Help Screen\hPurpose: Direct a print job to a specific printer
or print queue.\hOptions:
Printer=<printer name> (abbreviated P=)
Indicate to which printer the print job should
be sent. Replace <printer name> with the name
of the printer. The print queue associated with
the printer will be used. If you want to know which
print queue will be used include the Verbose
option.
Queue=<print queue name> (abbreviated Q=)
Indicate to which print queue the print job
should be sent.
There is no default set up unless you have created
a print job configuration.
The Printer and Queue options are mutually exclusive.
Server Help Screen\hPurpose: Direct a print job to a NetWare server
different from the default.\hOptions:
Server=<NetWare server name> (abbreviated S=)
Indicate the NetWare server to which data
should be sent for printing. The default is
your default server.
Tabs Help Screen\hPurpose: Control tab size in print jobs.\hOptions:
Tabs=<number> (abbreviated T=)
If your printer does not interpret tabs,
specify the number of spaces between 1 and 18
to replace each tab in your print job.
No Tabs (abbreviated NT)
Include if your printer accepts tab characters
as part of a byte stream. This insures that
all tabs in your print job arrive at the
printer unchanged. Default is NoTabs.
Verbose Help Screen\hPurpose: Request additional information about
printing parameters.\hOptions:
Verbose (abbreviated V)
Include if you wish to verify that the
combination of command line options and print
job configuration options are producing the
desired effect. The Verbose option also
clarifies which print queue is being used when
this might not otherwise be displayed. It also
causes pagination of the normal display of
filenames to the screen.
For help, type NPRINT /?
219: A form name can be no longer than 12 characters.
503: This utility is unable to find queue %s in the directory.
504: This utility is unable to find queue %s
on server %s.
Server Help Screen\hPurpose: Direct a print job to a NetWare Bindery
server.\hOptions:
Server=<NetWare server name> (abbreviated S=)
Indicate the NetWare server to which data
should be sent for printing.
This option forces Bindery attachment to the
server and should only be used to access
NetWare servers outside of the Directory.
973: The Unicode table files (*.001) cannot be found in the NLS directory or in the search drives.
975: The Unicode table files cannot be opened because there are already too many open files.
Close some files or modify your CONFIG.SYS file.
972: Access to the Unicode table files was denied.
970: The attempt to open the Unicode files failed.
974: The Unicode table files are corrupt.
971: The workstation does not have enough memory to load the Unicode table files.
611: The print job configuration (%s) could not be found in the directory.
610: The print job configuration (%s) could not be found on server (%s). Use PRINTCON utility to view the print job configurations on thes server (Use F4 key for bindery mode).
612: The print job configuration (%s) could not be found on server %s.
(.txt)